Skip to content
ATLANTIC · FRANCE · DEPUIS 1968French expertise · Service in Taiwan
Atlantic

LE CONFORT À LA FRANÇAISE

Le confort en grand.

Explorer 2 AIFlagship heat pump water heater

Hot water for every part of family life.

Atlantic Explorer 2 AI: illustrative interior showing the appliance and its setting
Une place dans votre quotidien.Illustrative home installation

Before an early start, after exercise or at the end of the day: 200L and 270L storage, an R290 heat pump and ACI Hybrid corrosion protection prepare hot water around the family’s routine.

Generous household capacity
200 / 270L
Next-generation heat pump refrigerant
R290
Active tank corrosion protection
ACI Hybrid

01 / LA CHALEUR DE L’AIR

L’air devient confort.

Heat from the air,
for hot water at home.

From heat pump heating to generous storage, Explorer 2 brings the family’s hot water preparation into one unit. Heat is drawn from the air through a heating cycle powered by electricity.

  1. 01

    Capter

    Capturing heat from the air

    A fan draws in air, and the evaporator transfers its heat to the refrigerant.

  2. 02

    Transformer

    Compression raises the temperature

    The compressor raises the refrigerant temperature so that heat can be transferred to the water storage system.

  3. 03

    Partager

    Heat exchange and hot water storage

    The heat exchanger transfers energy to the tank, preparing hot water for the next use.

Actual energy use and recovery time vary with ambient temperature, the temperature setting, inlet water temperature and water demand.

Atlantic Explorer 2 AI: cutaway showing the tank, insulation and heating components
Explorer 2 · International range construction diagram; equipment varies by supplied version

02 / AU CŒUR DU SYSTÈME

From heating to storage,
prepared for the whole family.

Heat pump unit
The evaporator, fan and compressor work together to bring heat from the air into the heating cycle.
Enameled tank
An enamel coating protects the storage tank, supported by ACI Hybrid active corrosion protection for long-term use.
Stored hot water
Choose between 200L and 270L around peak household demand and the time available for reheating.
ACI Hybrid: magnesium-coated titanium anode, impressed current and tank protection — conceptual diagram
ACI Hybrid · Tank corrosion protection diagram

03 / ACI HYBRID

Protéger, durablement.

Peace of mind,
starts inside the tank.

Lasting comfort depends on internal protection that works every day. ACI Hybrid combines magnesium, a titanium anode and a controlled impressed current to complement the enamel tank’s corrosion protection.

Magnesium · Establishing protection
Magnesium on the anode helps form corrosion protection on the inner surface of the tank.
Titanium and current · Ongoing protection
The titanium-core anode and an electronically controlled low current help maintain corrosion protection inside the tank.
Enamel · Working together
The vitreous enamel coating and anode protection each play their part in protecting the storage tank.

ACI Hybrid protects the tank against corrosion. It does not soften water or remove limescale; inspection and maintenance must still follow the manufacturer’s instructions.

04 / À VOTRE RYTHME

Hot water preparation,
in tune with your routine.

The manufacturer’s latest international hot water management responds to daily routines and changing needs. Modes, refrigerant and controls vary by version; confirm the supplied specification when selecting your unit.

La vie change.
Le confort s’adapte.

Regular weekday showers and changing weekend plans are the starting point for choosing an operating mode.

Explore the manufacturer’s international range
Eco+ · In step with water use
Adjusts hot water preparation to everyday use, reducing the need for repeated manual changes.
Absence · Time away
Adjust hot water production while you are away, with settings suited to periods without demand.
Boost · For extra demand
Activate faster hot water preparation when extra demand arises. Actual heating time depends on ambient conditions and the state of the tank.
Atlantic Explorer 2 AI: manufacturer product view
Explorer 2 · Atlantic utility room setting

05 / UNE INSTALLATION BIEN PENSÉE

Comfort begins,
with the right installation location.

A utility room, laundry area or service balcony needs more than enough space for a tank. The heat pump requires a suitable air source, while sound, drainage and service access must be considered in the layout.

Ambient air / ducted air
The manufacturer specifies an operating range of 5–43°C with ambient air and −5–43°C with ducted air. The configuration must suit the installation space.
Acoustics and location
The manufacturer states a sound power level of 47 dB(A). Perceived sound depends on the room, distance and installation conditions; consider the location during planning.

À LA MESURE DE VOTRE MAISON

Give the family’s hot water,
a complete plan.

Bathrooms on several floors, showers at similar times or weekend guests: consider peak demand, reheating time and pipe lengths together to choose the right capacity.

Plan your installation with TAADA
200L / 270L · Matched to your routine
Size the system around simultaneous demand and reheating needs, rather than household size alone.
Integrated floor-standing unit · Plan its space
Check the delivery route, filled weight, airflow, drainage and surrounding maintenance clearance.
Multiple bathrooms · Include the pipework
The site assessment includes distances to bathrooms, pipe insulation and any need for hot water recirculation.
Compare specifications and dimensions

Technical information:Atlantic International · Explorer 2 ↗ · ACI Hybrid corrosion protection ↗

FULL SPECIFICATIONS

Product specifications

  • The listed -5°C to 43°C range applies to ducted air. Ambient-air operation is specified from 5°C to 43°C.
  • Versions, accessories and connected services may differ between markets. Confirm the actual supplied specification with TAADA.

Explorer 2 next-generation range

ModelCapacityInstallation typeWater connectionsMaximum heat pump water temperatureOperating ambient temperatureRefrigerantOperating sound levelSuggested retail price (TWD)
Explorer 2 200200LIntegrated floor-standing unit3/4 in.62℃-5℃~43℃R290As low as 47 dB(A)NT$165,000
Explorer 2 270270LIntegrated floor-standing unit3/4 in.62℃-5℃~43℃R290As low as 47 dB(A)NT$179,000

REAL INSTALLATIONS

Installed projects

Real homes, guesthouses and commercial sites show how equipment is arranged in different spaces.

Atlantic Explorer 2 AI: installation in Taiwan
CASE 01Residential installation | Explorer 2 EXP 270 | 270 liters
Atlantic Explorer 2 AI: installation in Taiwan
CASE 02Residential installation | Explorer EXP 270 | 270 liters
Atlantic Explorer 2 AI: installation in Taiwan
CASE 03Residential installation | Explorer EXP 270 | 270 liters

PRODUCT VIDEOS

Product videos and installations

See the equipment, its controls and real installation settings in our product videos.

Confirm capacity, electrical supply and installation space.

A professional assessment before purchase helps ensure the equipment is suited to its actual installation.

RELATED PRODUCTS

Related products

Back to products